Do you have a question? Tel: +0755-89195500
Search
Selection table | Size(mm) | As Supplied(mm) D*(Min) | After recovered(mm) d*(Max) | Application Range/mm | Standard length/mm | |
36/10 | 36 | 10 | 12 ~ 20 | 250,500,750,1000,1500 | ||
50/15 | 50 | 15 | 18 ~ 40 | 250,500, 750,1000,1500 | ||
60/18 | 60 | 18 | 20 ~ 50 | 250,500,750, 1000,1500 | ||
70/22 | 70 | 22 | 25 ~ 60 | 250,500,750, 1000,1500 | ||
80/25 | 80 | 25 | 30 ~ 70 | 250,500,750, 1000,1500 | ||
100/30 | 100 | 30 | 35 ~ 90 | 250,500,750, 1000,1500 | ||
135/38 | 135 | 38 | 40 ~ 120 | 250,500,750, 1000,1500 | ||
185/55 | 185 | 55 | 65 ~ 165 | 250,500,750, 1000,1500 | ||
200/60 | 200 | 60 | 80 ~ 180 | 250,500,750, 1000,1500 | ||
220/65 | 220 | 65 | 90 ~ 200 | 250,500,750, 1000,1500 | ||
*NOTE D*= Diameter as supplied d* = Diameter after recovered W*= Thickness of sleeve as supplied w*= Thickness of sleeve after fully recovered | ||||||
Key technical performances | Properties | Test Condition and Method | Requirement | |||
Bursting Strength | Test Temp: 23 ±5℃ | 15MPa min. | ||||
Thermal Ageing Bursting strength | 168 hrs at 150℃ ±2℃ After free shrinkable | 13.7MPa min 14MPa min | ||||
Dielectric strength | Electrode Surface Dia: 6mm Wight: 50±2gms Voltage steps: 2kV/20sec | Min 12kV/mm | ||||
Split Resistance | Temp: 200±2℃ Test time 23±3℃ | No split Propagation | ||||
Carbon Content UV Res of Out/layer | Heating rate: 20℃ /min Gas flow rate: 300cc/min | Min 2.6±0.25% | ||||
Cold Crack Resistance | Test temp ≤ -40℃ | No cracking | ||||
Resistance to aggressive media Bursting Strength | Test media: Fuel oil, petroleum | Min 13.7MPa | ||||
Environmental Stress cracking | 10% Igepal Co 630 solution immersion Time 30 days Test Temp: 50±3℃ | No cracking | ||||
Temp. indicating paint conversion | Completely conversion | Completely conversion | ||||
Properties of adhesive | ||||||
Adhesive Softening Point | ASTM E28 | 90±10℃ | ||||
Peel Strength | -PE at 23±2℃ -Pb at 23±2℃ | Min 70N | ||||
Shear Strength | At 23±2℃ Copper Mirror test Test time: 16hrs Test temp: 60±℃ | Min 100N | ||||
Corrosive Effect | ASTM D 1693 | No effect | ||||
ordering information | Color | Standard | Black | |||
Standard packaging | In 1.2-meter [4-foot] lengths | |||||
Ordering description | Specify product name, size and Color (for example, GWS 70/22 Black) | |||||
* Thermal paint dots and other cutting length are available on request. |