Anti-tracking Tubing / GAT / GATA
Anti-tracking Tube
Features
• Flame retardant
• Shrink ratio: 3:1
• Application up to 42kV
• RoHS compliant
Features
• Flame retardant
• Shrink ratio: 3:1
• Application up to 42kV
• RoHS compliant
Typical technical performances
| Test Items | Test Method | Test Requirements |
| Tensile strength | ASTM D 2671 | 10MPa min. |
| Ultimate elongation | ASTM D 2671 | 200% min. |
| Tensile strength after Aging at 150℃ for 168hrs |
ASTM D 2671 | 10MPa min. |
| Ultimate elongation after Aging at 150℃ for 168hrs |
ASTM D 2671 | 100% min. |
| Heat shock at 200℃ /30min | ASTM D 2671 | No cracking, dropping |
| Density | ASTM D 792 | 1.2~1.3g/cm3 |
| Dielectric strength | IEC 60243 | 10kV/mm(2.5mm) min. |
| Volume resistivity | ASTM D 2671 | 1012Ω.cm min. |
| Low temperature flexibility -40℃ /4hrs |
ASTM D 2671 Proc.C | No cracking |
| Permittivity | ASTM D 150 | 3 (nom.) |
| Tracking resistance | ASTM D 2303 | No tracking |
Ordering information
| Color | Standard | Red |
| Standard packaging | In 1.2-meter [4-foot] lengths | |
| Ordering description | Specify product name, size and Color (for example, GAT 19/6 Red) | |
* Other cutting lengths are available on request.
Dimensions
| Size (mm) | As supplied(mm) | After recovered (mm) | Standard length (m) | |
| D*(Min.) | d*(Max.) | w*(Min.) | ||
|
Anti-tracking tube (GAT) |
||||
| 19/6 | 19 | 6 | 2.4 | 30m/spool or 0.5-1.5m |
| 30/10 | 30 | 10 | 2.8 | 30m/spool or 0.5-1.5m |
| 38/12 | 38 | 12 | 2.8 | 30m/spool or 0.5-1.5m |
| 40/16 | 40 | 16 | 2.8 | 30m/spool or 0.5-1.5m |
| 49/16 | 49 | 16 | 2.8 | 30m/spool or 0.5-1.5m |
| 55/18 | 55 | 18 | 2.8 | 30m/spool or 0.5-1.5m |
| 65/21 | 65 | 21 | 3.0 | 30m/spool or 0.5-1.5m |
| 75/25 | 75 | 25 | 3.0 | 30m/spool or 0.5-1.5m |
| 85/29 | 85 | 29 | 3.3 | 30m/spool or 0.5-1.5m |
| 100/40 | 100 | 40 | 3.8 | 0.5-1.5m |
| 130/50 | 130 | 50 | 3.8 | 1.0-1.5m |
|
Anti-tracking tube with adhesive (GATA) |
||||
| 30/10 | 30 | 10 | 2.8 | 1.0-1.5 |
| 40/12 | 40 | 12 | 2.8 | 1.0-1.5 |
| 43/14 | 43 | 14 | 2.8 | 1.0-1.5 |
| 49/16 | 49 | 16 | 2.8 | 1.0-1.5 |
| 55/18 | 55 | 18 | 2.8 | 1.0-1.5 |
| 65/21 | 65 | 21 | 3.0 | 1.0-1.5 |
| 75/25 | 75 | 25 | 3.3 | 1.0-1.5 |
| 85/29 | 85 | 29 | 3.3 | 1.0-1.5 |
| 100/40 | 100 | 40 | 3.8 | 1.0-1.5 |
| 130/50 | 130 | 50 | 3.8 | 1.0-1.5 |
D* = Inner diameter as supplied
d* = Inner diameter after fully recovered
w* = Wall thickness after fully recovered
