Do you have a question? Tel: +0755-89195500
Search
Typical technical performances | Test Items | Test Method | Test Requirements | ||
Tensile strength | ASTM D 2671 | 12MPa minimum | |||
Ultimate elongation | ASTM D 2671 | 350% minimum | |||
Tensile strength after Aging at 150℃ for 168hrs | ASTM D 2671 | 12MPa minimum | |||
Ultimate elongationafter; | ASTM D 2671 | 300% minimum | |||
Density | ASTM D 792 | 1.0~1.1g/cm3 | |||
Dielectric strength | ASTM D 60243 | 12kV/mm(2mm) min. | |||
Volume resistivity | ASTM D 2671 | 1012Ω cm min. | |||
Low temperature flexibility -40℃ /4hrs | ASTM D 2671 | No cracking of outer jacket | |||
Properties of hot melt adhesive | |||||
Softening point | ASTM E28 | 85+/-5℃ | |||
Peel strength(PE) | ASTM D 2671 | 4N/cm min. | |||
Water absorption | ISO 62 | 0.2% max. | |||
ordering information | Color | Standard | Black | ||
Standard packaging | In 1.2-meter [4-foot] lengths or on spools (for uncoated tubing only) | ||||
Ordering description | Specify product name, size and Color (for example, GHWT/U 33/8 Black) | ||||
* Other cutting length are available on request. | |||||
Dimensions | Size(Inch) | As supplied(mm) | After recovered (mm) | Standard length (m) | |
D*(Min) | d*(Max) | w*(Min) | |||
GHWT Medium wall tubing with hot melting adhesive | |||||
9/3 | 9 | 3 | 2.0 | 1.0-1.5 | |
16/5 | 16 | 5 | 2.4 | 1.0-1.5 | |
22/6 | 22 | 6 | 2.7 | 1.0-1.5 | |
33/8 | 33 | 8 | 3.2 | 1.0-1.5 | |
40/12 | 40 | 12 | 4.0 | 1.0-1.5 | |
55/16 | 55 | 16 | 4.0 | 1.0-1.5 | |
65/19 | 65 | 19 | 4.0 | 1.0-1.5 | |
75/22 | 75 | 22 | 4.0 | 1.0-1.5 | |
85/25 | 85 | 25 | 4.2 | 1.0-1.5 | |
95/25 | 95 | 25 | 4.2 | 1.0-1.5 | |
105/29 | 105 | 29 | 4.2 | 1.0-1.5 | |
115/34 | 115 | 34 | 4.2 | 1.0-1.5 | |
130/36 | 130 | 36 | 4.2 | 1.0-1.5 | |
180/58 | 180 | 58 | 4.2 | 1.0-1.5 | |
200/65 | 200 | 65 | 4.2 | 1.0-1.5 | |
235/65 | 235 | 65 | 4.4 | 1.0-1.5 | |
265/75 | 265 | 75 | 4.8 | 1.0-1.5 | |
300/85 | 300 | 85 | 4.8 | 1.0-1.2 | |
350/100 | 350 | 100 | 4.8 | 1.0-1.2 | |
385/110 | 385 | 110 | 4.8 | 1.0-1.2 | |
GHWT/U Medium wall tubing without hot melting adhesive | |||||
9/3 | 9 | 3 | 2.0 | 1.0-1.5 | |
16/5 | 16 | 5 | 2.4 | 1.0-1.5 | |
22/6 | 22 | 6 | 2.7 | 1.0-1.5 | |
33/8 | 33 | 8 | 3.2 | 1.0-1.5 | |
40/12 | 40 | 12 | 3.7 | 1.0-1.5 | |
55/16 | 55 | 16 | 3.7 | 1.0-1.5 | |
65/19 | 65 | 19 | 3.7 | 1.0-1.5 | |
75/22 | 75 | 22 | 3.7 | 1.0-1.5 | |
85/25 | 85 | 25 | 3.7 | 1.0-1.5 | |
95/25 | 95 | 25 | 3.7 | 1.0-1.5 | |
115/34 | 115 | 34 | 4.0 | 1.0-1.5 | |
130/36 | 130 | 36 | 4.0 | 1.0-1.5 | |
180/58 | 180 | 58 | 4.1 | 1.0-1.5 | |
200/65 | 200 | 65 | 4.1 | 1.0-1.5 | |
235/65 | 235 | 65 | 4.1 | 1.0-1.5 | |
265/75 | 265 | 75 | 4.1 | 1.0-1.5 | |
300/85 | 300 | 85 | 4.1 | 1.0-1.2 | |
D* = Inner diameter as supplied. d* = Inner diameter after fully recovered. w* = Wall thickness after fully recovered. |