Heat Shrink Wrap-around Sleeve / GWS
Heat Shrink Wrap-around Sleeve
Features
• Quick and easy installation
• Hot melt adhesive forms a durable, moisture resistant seal
• Fit for wide range of cable sizes
• RoHS compliant
Features
• Quick and easy installation
• Hot melt adhesive forms a durable, moisture resistant seal
• Fit for wide range of cable sizes
• RoHS compliant
Selection table
|
Size (mm) |
As supplied(mm) | After recovered (mm) | Application Range/mm |
Standard length/mm | ||
| D*(Min.) | W*(Min.) | d*(Max.) | w*(Min.) | |||
| 36/10 | 36 | 1.2 | 10 | 3 | 12~20 | 250,500,750,1000,1500 |
| 50/15 | 50 | 1.2 | 15 | 3 | 18~40 | 250,500,750,1000,1500 |
| 60/18 | 60 | 1.2 | 18 | 3 | 20~50 | 250,500,750,1000,1500 |
| 70/22 | 70 | 1.2 | 22 | 3 | 25~60 | 250,500,750,1000,1500 |
| 80/25 | 80 | 1.2 | 25 | 3 | 30~70 | 250,500,750,1000,1500 |
| 100/30 | 100 | 1.2 | 30 | 3 | 35~90 | 250,500,750,1000,1500 |
| 135/38 | 135 | 1.2 | 38 | 3 | 40~120 | 250,500,750,1000,1500 |
| 185/55 | 185 | 1.2 | 55 | 3 | 65~165 | 250,500,750,1000,1500 |
| 200/60 | 200 | 1.2 | 60 | 3 | 80~180 | 250,500,750,1000,1500 |
| 220/65 | 220 | 1.2 | 65 | 3 | 90~200 | 250,500,750,1000,1500 |
Key technical performances
| Properties | Test Condition and Method | Requirement |
| Tensile strength | Test Temp: 23 ±5℃ | 15MPa min. |
| Thermal Ageing Bursting strength |
168 hrs at 150℃ ±2℃ After free shrinkable |
13.7MPa min |
| Dielectric strength | Electrode Surface Dia: 6mm Wight: 50±2gms Voltage steps: 2kV/20sec |
Min 12kV/mm |
| Split Resistance | Temp: 200±2℃ Test time 23±3℃ |
No split Propagation |
| Carbon Content UV Res of Out/layer |
Heating rate: 20℃ /min Gas flow rate: 300cc/min |
Min 2.6±0.25% |
| Cold Crack Resistance | Test temp ≤ -40℃ | No crackin |
| Resistance to aggressive media Bursting Strength |
Test media: Fuel oil, petroleum jelly Test temp: 70±2℃ |
Min 13.7MPa |
| Environmental Stress cracking |
10% Igepal Co 630 solution immersion Time 30 days Test Temp: 50±3℃ |
No cracking |
| Temp. indicating paint conversion |
Completely conversion | Completely conversion |
| Properties of adhesive | ||
| Adhesive Softening Point | ASTM E28 | 90±10℃ |
| Peel Strength | -PE at 23±2℃ -Pb at 23±2℃ |
Min 70N |
| Shear Strength | At 23±2℃ Copper Mirror test Test time: 16hrs Test temp: 60±℃ |
Min 100N |
| Corrosive Effect | ASTM D 1693 | No effect |
Ordering information
| Color | Standard | Black |
| Standard packaging | In 1.2-meter [4-foot] lengths | |
| Ordering description | Specify product name, size and Color (for example, GWS 70/22 Black) | |
* Other cutting lengths are available on request.
